We use some essential cookies to make this website work.
We’d like to set additional cookies to understand how you use forestresearch.gov.uk, remember your settings and improve our services.
Preparing to search
Conversion factors between cubic metres and green tonnes
The following factors have been used in Chapter 2 (Timber) to convert between cubic metres (m3) and green tonnes:
The diagram shows separate conversion factors to use when converting softwood (SW) and hardwood (HW) with arrows to indicate the direction of conversion. For example, to convert 1,000 green tonnes of SW into an under bark volume, the 1,000 green tonnes should be multiplied by the conversion factor of 0.982 to give 982m3 underbark. There is no difference between the softwood and hardwood conversion factors for converting between standing volume and overbark volumes.
The following factors have been used in Chapter 3 (Trade) to convert between cubic metres (m3) and metric tonnes:
In this case, all the factors are expressed as volumes (in m3) per weight (in tonnes). Therefore, to convert 1,000 tonnes of sawn softwood into a volume, the 1,000 tonnes should be multiplied by 1.82 to give 1,820 m3.
Conversion factors between cubic metres and metric tonnes
|Fuelwood, including wood for charcoal||1.38|
|Wood chips, sawdust, etc||1.48|
|Industrial roundwood (wood in the rough) – softwood||1.43|
|Industrial roundwood (wood in the rough) – hardwood||1.25|
|Sawnwood – softwood||1.82|
|Sawnwood – hardwood||1.43|
|MDF (medium density fibreboard)||1.667|
|Insulating board – density 0.35-0.5 g/cm3||1.667|
|Insulating board – other||4.00|
The following factors have been used in Chapter 3 (Trade) where required to convert to wood raw material equivalent, which indicates the volume of wood (in m3underbark) needed to produce one unit of a final product:
Conversion factors to Wood Raw Material Equivalent (wrme) underbark
|Product||Measurement unit||Factor to wrme underbark|
|Chips, sawdust, etc||tonnes||1.20|
|Industrial roundwood (rough, treated)||m3||1.10|
|Industrial roundwood (in the rough)||m3||1.00|
|Chemical dissolving pulp||tonnes||2.50|
|Sulphate pulp, unbleached||tonnes||6.00|
|Sulphate pulp, bleached||tonnes||4.50|
|Veneer (< 6mm)||tonnes||3.45|
|Other wood-based panels||tonnes||2.50|
|Packing cases, pallets||tonnes||2.00|
|Other manufactured wood||tonnes||2.50|
|Writing & printing paper, uncoated||tonnes||3.50|
|Other paper & paperboard||tonnes||2.50|
1. A revised set of figures was produced in FC Technical Paper 19, “Revised Forecasts of the Supply and Demand for Wood in the UK” (Forestry Commission, 1996), but these have not been used in this publication.
Cookies are files saved on your phone, tablet or computer when you visit a website.
We use 3 types of cookie. You can choose which cookies you're happy for us to use.
These essential cookies do things like remember your progress through a form. They always need to be on.
We use Google Analytics to measure how you use the website so we can improve it based on user needs. Google Analytics sets cookies that store anonymised information about: how you got to the site the pages you visit on forestresearch.gov.uk and how long you spend on each page what you click on while you're visiting the site
Some forestresearch.gov.uk pages may contain content from other sites, like YouTube or Flickr, which may set their own cookies. These sites are sometimes called ‘third party’ services. This tells us how many people are seeing the content and whether it’s useful.