to Forestry Commission home page
to Forest Research home page

Forest Research home > Products & services > Plant, tree, soil and water testing

Plant Quality Testing Service

What can it do for you?

Our advisory service helps nursery managers and foresters to obtain information on the physiological and morphological quality of their stock before planting.

Using good quality plants is an essential precondition for successful establishment. Planting poor quality stock may result in reduced survival and early growth.

The Plant Quality Testing Service is a chargeable service which has been in operation since 1992. We test samples of plants and provide reports for anyone in the forestry sector.

A range of physiological tests can be used to measure different aspects of a plant's condition. (Test results are related to baseline information during interpretation and report writing).

Tests available

Test typePhysicalPhysiologicalSample size (no. of plants)Time for report
(working days)
ShootsRootsShootsRoots
Morphology: Height, RCD, usability Yes x x x 15** 1
Morphology: Root:shoot ratio Yes Yes x x 15** 4
Root electrolyte leakage (REL) x x x Yes 10*  2
Shoot electrolyte leakage (SEL) x x Yes x 10*  2
Root moisture content (RMC) x x x Yes 15** 4
Root growth potential (RGP) Yes Yes Yes Yes 15   14
Shoot/root frost tolerance x x Yes Yes 15   14 to 21

 

* Can use the same sample for both REL and SEL tests

** Can use the same sample for morphology and RMC tests

Morphological values are compared with an industry standard BS3936 part 4. Plant usability is also scored identifying those that should have been culled at the nursery.

Root electrolyte leakage (REL) values are highly correlated with plant survival and height growth. Actively growing plants or those that have suffered damage have higher values than dormant or undamaged plants.

Shoot electrolyte leakage (SEL) can be used to predict if needle loss is likely after planting. Plants with high leakage values may suffer browning, needle loss or bud death.

Frost tolerance measurements give an accurate indication of dormancy and the plant's ability to survice cold/freeze storage or cold planting site conditions.

Interpretation of results categorises plant samples into one of three 'quality' ratings which can be linked to an expected survival percentage.

Test results can also be used to assess plant dormancy prior to lifting. Fully dormant plants can be safely cold stored for longer than active plants.

Testing cold stored plants at intervals will detect the onset of physiological deterioration and help prevent unnecessary damage.

Baseline information available

Conifer speciesBroadleaved species
Pines
Spruce (QSS, VPSS, RSS, WSS, NS)
Douglas fir
Larches
Noble fir
Grand fir
Ash
Rowan
Oak (pendunculate and sessile)
Beech
Lime
Birch (silver and downy)
Cherry
Norway maple

Limited information is available for minor species, but general principles can be applied from related species.

For more information contact:

Alan Harrison
Forest Research
Northern Research Station
Roslin
Midlothian EH25 9SY

Tel: 0131 445 2176
Fax: 0131 445 5124
Email: alan.harrison@forestry.gsi.gov.uk

                    

Logo

What's of interest